Car Sticker Installation Steps

Tools: transfer film, rag, scraper or credit card

1. Clean the car body and sprinkle water evenly on the body parts to be pasted-to reduce the viscosity of the stickers and facilitate the adjustment of the position;

2. Determine where you want to post. While slowly applying, gently scratching with a tool, peel off the transfer film (translucent paper shown);

3. When encountering the door handle or anti-rubbing strip, cut the material and wrap it according to the situation;

4. Appropriate adjustment, after the general position of the figure is correct, forcefully scrape off water and air bubbles repeatedly. Remove the transparent transfer film;

5. Use a utility knife to draw a knife across the door and seam, and apply it inward;

6. Don't let the car sticker and body separate or protrude;

7. Try to let the moisture in the car stickers dry, and if appropriate, you can heat and dry appropriately. Depending on the weather, wash the car after a day or two.