Method For Installing And Fixing Aluminum Sign Products

How to install and fix aluminum sign products? Can it be pasted on the product? Can I fix aluminum sign products to the product with screws? These are the questions often asked by customers, and we will answer them one by one: the installation and fixing methods of aluminum sign products in the process of use.

First of all, I will introduce to you the basic installation and fixing methods of aluminum signboards: sticking double-sided tape on the back, installing with feet on the back, drilling or punching, pressing iron buckles, etc.

1. The installation of double-sided adhesive tape on the back is widely used: it is commonly used in furniture, electrical appliances, doors and windows, electronic products, kitchenware, bathroom and other products to be fixed by the adhesive method. It should be noted that the installation surface should be free of impurities, Oil stain, ash layer, etc. The quality of the adhesive and the length of time depend on the quality of the double-sided tape. Please choose imported 3M or ordinary foam rubber, oil glue, water glue and other double-sided tape according to actual needs.

2. Installation with feet on the back: You can set the diameter, length, and distance of the feet according to the required position. This method is firm to install, but the requirements on the contact surface are more stringent. Symmetry with aluminum sign products to ensure installation fit.

3. Drilling or punching installation: punching or drilling can be done at the corresponding position on the surface, and the screws can be installed and fixed. The principle is the same as the installation with feet, and the equipment needs to reserve corresponding holes.

4. Pressed iron buckle installation and fixing: This installation method is usually used for luggage products. The iron buckle pressed on the back of the aluminum sign product can be inserted into the required installation items and fastened.